Irritech four wheel heavy duty cart linear is ideal to irrigate large fields. By using a one-cart platform which is completely customizable to your requirements. Based on your infrastructure, water can be delivered to the linear through ditch or hose. The high-flow capacity irritech linear can suuply right amount of water, no matter what crop you grow.

Irritech hose feed linear works in a lateral movement to irrigate a rectangular area. Unlike center pivot systems, which area irrigated depends only on the length of the machine, the area irrigated by the lateral move system is determined by system length and travel distance.

Water is fed to the irrigation system with a flexible hose attached to the machine. The hose feed system requires hydrants and underground pipeline.

Irritech hose feed irrigation, like ditch feed, can have above ground cable guidance, furrow guidance, or GPS guidance. This would be ideal for smaller fields because the hose will not be dragged very far as a longer field, longer field requires more labor and maintenance.

By using Irritech ditch-fed lateral, water is fed from the ditch alongside irrigation machine. This machine is a lateral move ditch feed irrigation system. As ditch can supply bigger quantity of water, this system can travel longer. The system can be designed with wings on each side of center cart, and the span length of entire machine can be made longer than 1200m.

Irritech Standard 4-wheel ditch feed linear, center fed or end fed, with CAPRARI rotary pump powered by John Deere diesel engine via clutch or Cornell Run-dry pump as well as frontal belt drive for three phase generator.

Irritech lateral move irrigation systems have enough features to match your needs. When your goal is watering square or rectangular field while conserving water, you could rely on Irritech for an ideal solution.

Irritech Canal Feed system carries its own pumping equipment and generator within its compact and clean design. You can expect more annual energy savings from its ability to reduce system pressure loss by using the center-feed option for larger fields.